Advantage and Disadvantage of Belt Conveyor Drives
Mar 12, 2024
For multi-motor driven belt conveyors, if you choose the Y-type motor + torque-limiting hydraulic coupler + deceleration drive method, it is recommended to choose a torque-limiting hydraulic coupler with a rear auxiliary cavity. Since the torque-limiting hydraulic coupling is limited by heat dissipation conditions, for belt conveyors with a single machine power of less than 630kw and a length of less than 1500m, the Y-type motor + torque-limiting hydraulic coupling + reduction drive method is generally used.
Advantages: high cost performance, simple and compact structure, small maintenance workload, low maintenance cost, protection of motor overload, balanced motor power when driven by multiple motors, segmented delayed start, reducing the impact on the power grid when the belt conveyor starts, high reliability, Price is low. It is a good driving method for belt conveyors with a length less than 1500m.
Disadvantages: Poor soft start performance, not suitable for downward belt conveyors and belt conveyors that require speed adjustment function.
4. Y-type motor + variable speed hydraulic coupling + reducer
This driving method is a commonly used driving method for large belt conveyors, and is generally used for long-distance large belt conveyors with a machine length greater than 800m.
Advantages: simple structure, load starting, motor overload protection, and small maintenance workload. When the motor is empty and driven by multiple motors, it can be started individually and delayed to reduce the impact on the power grid when the belt conveyor starts. It has high reliability, good soft starting performance, controllable starting performance, that is, controllable starting time, controllable starting speed curve, and low price.
Disadvantages: When the hydraulic coupler is started, because the oil volume change and speed change curve in the working room of the hydraulic coupler are nonlinear and backward, the controllability and dynamic response are slow, and it is difficult to perform closed-loop control, which sometimes occurs. Oil leak. It is not suitable for downward belt conveyors and belt conveyors that require speed adjustment function.
https://www.songdaglobal.com/






