Development Of Stacker Control System
Jan 04, 2024
In China, the control system of stackers has basically gone through three stages: on-site manual control, semi-automatic control, and automatic control
1. Single machine manual control stage
The control system of the stacker in the 1960s and 1970s was composed of separated relays, contactors, and multi-core traditional cables. The position detection control switch of the mechanism was also in the early stage of development, and only mechanical switches with simple functions were used, with extremely low detection accuracy and protection level. The operator can operate a single equipment independently on site in the driver's cab of the stacker, which cannot achieve the complex interlocking function of the system.
The communication function between the stacker and the ground control center is achieved through the connection of relay contacts through multi-core traditional cables; The monitoring function of the system on devices is achieved through traditional analog instrument panels. In this way, the staff in the main control room of the transmission system are not familiar with the working conditions and operating parameters of the on-site equipment, and there are no alarm signals and related data of the equipment in the control room. The transmission of information is also done manually.
In actual industrial production, such systems not only have complex circuits, large volumes, low levels of automation, poor operability and stability, but are all manually operated.
2. Semi automatic control stage
In the late 1970s, the stacker machine adopted programmable control (PLC) master slave station technology and the application of terminal displays, greatly reducing the use of intermediate relays and control cables, and improving the monitoring of the machine's operating status. In a PLC control system, the control program written by the user expresses the process requirements of the production process and is stored in the user program memory of the PLC in advance. Execute the stored program item by item during runtime to complete the operations required by the process flow.
However, PLC is ultimately an electronic device that can only perform simple control over the production process, and can only exchange simple data with other devices, making it difficult to achieve complex intelligent control and large-scale management, and lacking good human-machine interaction. For the sake of safety and convenience, most of the existing stacker control systems still use a combination of manual control and PLC semi-automatic control.
3 Automatic control stage
In order to meet the requirements of highly automated production of large ore materials, coal materials, ports, etc., improve work efficiency, and ensure the stability and continuity of the system. Automatic control refers to automation, intelligence, modernization of communication and management technology.
Automatic control refers to the unmanned control of the stacker, which monitors the working status of the stacker through a monitoring system. For example, the process operation control of the stacking machine for ore powder should be automatically controlled under specific system controls. The operator sits in the control room and can switch screens on the computer screen to understand the various parameters of the stacker, the position of the crane, auxiliary systems, and other components, as well as the operation of each system; Set the operating parameters of the stacker, and use the automatic system to understand the real-time operation status and fault causes of the stacker, and automatically record fault information.






