Maintenance method for conveyor belt of tracked slag scraper
Feb 01, 2024
During operation, the conveyor belt of the crawler slag scraper, as a component that frequently comes into contact with stones, is prone to wear and tear, so its lifespan may decrease with prolonged use. If the operator lacks maintenance knowledge, it will further cause the conveyor belt to wear out. So the operator's mastery of maintenance and upkeep knowledge of the slag scraper determines the lifespan of vulnerable parts.
It is strictly prohibited to rotate the conveyor belt when the crawler slag scraper is walking, reduce the frequency of rotation of the conveyor belt, and extend its service life. When digging, there may be some larger stones. Especially when dealing with sharp stones, be careful not to forcefully pass through the gantry to prevent the conveyor belt from being scratched one by one. At this point, the stone weighing over a hundred pounds can be smashed and then loaded.
When the crawler scraper is working (digging and scraping), be careful not to hang the bucket teeth on the rotating conveyor belt. Long term use may cause the supporting rollers to fall off. In this case, timely handling is necessary to prevent damage to the conveyor belt.






