Application of industrial assembly line belt conveyor turning equipment
Apr 08, 2024
In addition to the purpose of the belt conveyor turning device, the conveying equipment and assembly lines need to be specially designed according to the specific situation when using the functions of turning, lifting and other devices. Also consider operational safety and structural reliability for long-term use.
It is necessary to change the direction of transportation and operation due to factors such as process and site in the assembly line system. Therefore, curved conveyors of various structural types are needed. Commonly used turning devices for conveying equipment in assembly lines include turning roller conveyors, turning belt conveyors, turning chain plate conveyors, corner mechanism rotary tables, translation trolleys, jacking translation transitions, etc.
1. Turning roller conveyor
With a simple structure, the turning roller conveyor is a commonly used conveying equipment to achieve horizontal turns or slope-level turns in the conveyor line. The price is low, and there are two drive modes: unpowered hand push and motor drive; the frame is available in three categories: stainless steel, carbon steel, and aluminum profiles; the rollers are all tapered rollers, and the angle needs to be designed according to the turning radius and the width of the conveyor line; The surface of the drum is carbon steel galvanized, and the surface is covered with rubber, polyurethane, etc., or with process pallet materials. The curved roller conveyor is suitable for conveying workpieces with a flat bottom surface.
2. Belt conveyor turning device
The motor drives the drum to move the belt line. The curved belt conveyor uses tapered rollers at both ends and a series of limiting angle roller sets on the assembly line to limit the conveyor belt guide bar to run within the trajectory. Therefore, it usually runs synchronously with the linear belt conveyor. Suitable for conveying lighter materials, the curved belt conveyor requires an independent drive device. Irregular shapes can also be conveyed, but the size of the material needs to be larger than the gap size of the transition section. If the material is very small and needs to be conveyed, the transition point of the two conveyor lines can be designed with a height difference and staggered arrangement, but the material must be able to withstand falling. Coal mine clearance machine | Coal mine clearance machine manufacturer
3. Angle mechanism rotating table
Conventional conveyors such as rollers, belts, double-speed chains, plate chains, etc. can be installed on the platform mechanism. The angle mechanism rotary table is actually a platform mechanism that rotates at a certain angle. It is a deformation of the belt conveyor turning device. Then rotate the turntable along the center of rotation in several ways. The power of the angle mechanism rotary table generally has a cylinder or motor to push the rack and pinion, the motor is driven through the transmission pair, and the motor drives a corner of the rotary table.
https://www.songdaglobal.com/
