Adjustment of the deviation of the bidirectional running belt conveyor

The adjustment of belt deviation of two-way belt conveyor is relatively more difficult than that of one-way belt conveyor. In specific adjustment, one direction should be adjusted first, and then another. When adjusting, carefully observe the relationship between the direction of belt movement and the trend of deviation, and make adjustments one by one. The focus should be on the adjustment of the driving drum and the reversing drum, followed by the adjustment of the supporting rollers and the adjustment of the material discharge point. At the same time, it should be noted that when vulcanizing the joint of the belt, the force on the length direction of the belt section should be uniform, and when using guide chain traction, the force on both sides should be as equal as possible.